This is the new skylight I purchased from Amazon. It is an ICON 12081 RV Skylight. My only disappointment is that the tint is not as dark as the original.
My old skylight developed some cracks and was very brittle. Removing the old sealer and screws was not too difficult. The hard part was separating the inner and outer skylights because I did not want to replace the inner one. I used my heat gun to warm up the adhesive and the two parts came apart with just a small effort. I was able to do so without damage to either the top or bottom.
This is the old outer skylight after separating it from the inner. Proof that it CAN be separated without damage.
Inner and Outer skylights sealed together and screwed in place.
EternaBond tape added and ready for entire roof to be resealed.
Leave a Reply